New 7210R Tractor

Specifications

Nebraska Test number	TBD Nebraska Test

Manufacturer	John Deere
Engine family	6.8L: EJDXL06.8302
Aspiration	Dual turbochargers, variable geometry turbo with fixed geometry turbo in series
Cylinders/Displacement, cu. in. (L)	6 / 6.8 L 415 cu in.
Cylinder Liners	Wet
Fuel tank capacity, US Gal. (L) (Open; Cab)	Standard e23 PST with G47/48 tires: 125 (475), Quad Transmission with G47/48 tires: 133 (503), IVT with G47/48 tires: 137 (520)
Underhood muffler

Advertised PTO hp (kW) @ Rated rpm	170 @ 2100 per SAE PTO hp 126.8 kW
Official PTO hp (kW) @ Rated rpm
Advertised Engine hp (kW) @ Rated speed	210 @ 2100 per 97/68EC PS engine hp 154.5 kW
Max Unballast Drwbr hp (kW) @ Eng rpm
Maximum Torque (PTO) @ rpm, lb-ft (Nm)
Max Torque Rise (80% rtd spd) @ Eng rpm
Maximum Torque Rise % (PTO) @ Eng rpm

PTO @ Rated Eng rpm
Standard PTO Speed @ Eng speed
Maximum PTO Power @ Eng rpm
Maximum Engine Power @ Eng rpm
Max Unballasted Drawbar Power @ Eng rpm
75% Load, Full Engine rpm (Unballasted)
75% Load @ Reduced rpm (Unballasted)

Std. Transmission; Forward/Reverse	e23 PST; 23/11
Opt. Transmission; Forward/Reverse	CommandQuad Eco; 20/20; IVT
Reverser	Left-hand or Right-hand (LH only with CommandQuad Eco)
On-the-Go Shifting (Yes/No/Partial)	Yes
Clutch; Wet/Dry	Wet
Creeper	IVT

Standard	1-3/4 in., 20-spline, 1,000-rpm
Optional	1-3/4-in., 20-spline, 1,000-rpm with 1-3/8 in. 540*/1000 rpm gearcase, shiftable at rear of tractor 1-3/4-in., 20-spline, 1,000-rpm with 1-3/8 in. 540E/1000/1000E rpm gearcase, Electronically shiftable in cab 1-3/4-in., 20-spline, 1,000-rpm with 1-3/8 in. 540/540E/1000 rpm gearcase, Electronically shiftable in cab
PTO Speeds @ Engine rpm	540/1000 PTO rpm @ 1950 engine rpm 540E/1000E PTO rpm @ 1750 engine rpm
PTO Actuation	Electro-hydraulic

Type	Closed-center, pressure/flow compensated
Pump Rated Output, GPM (L/min.)	Standard 43 gpm 162 L/minOptional 32, 59 gpm 121.1, 223.3 L/min
Rated Flow @ One SCV, GPM (L/min.)	33, 35 gpm 126, 132 L/min
Max Output @ SCV Couplers, GPM (L/min.)
Maximum Operating Pressure, psi (kPa)	2958 psi 20,400 + or- 300 kPa
Maximum Hydraulic Power, hp (kW)
Hitch Draft Control Load Sense Type	Electronic
Remote Control Valves Available	3, 4 (Standard), 5, 6 3 Mid-mount (max. 9) option 2 Front SCV option
Hitch Category (SAE Designation)	Cat 3/3N
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.	Standard 12000 lb 5443 kgOptional 15200 lb 6895 kg
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)
Sensing type	Electro-hydraulic
Joystick SCV control	Electro-hydraulic optional

Type	Inboard planetary
Differential controls	Electro-hydraulic
Availability	Front YesFront & Rear Yes Yes
Engage On-the-Go Rear Differential Lock	Yes
Axle Type	Bar axle, rack and pinion
Brakes, Type and Control	Hydraulic wet disc with retractors

Rollover Protective Structure, OOS	Gearshift Location - Console/Floor CommandARM
Cab	Doors LHPlatform - Flat/Straddle FlatSeat Suspension System Air std. Active Seat (optional) Cab suspension with Air Seat (optional)

Wheelbase, in. (mm)
Front Tread Range, in. (mm)
Rear Tread Range, in. (mm)
Minimum Rear Tread Setting, in. (mm)
Front Axle Clearance, in. (mm)
Turning Radius w/Brakes, ft (m)
Turning Radius w/o Brakes, ft (m)
Unballasted Operating Weight, lb (kg)
Approx. Ship Wgt, lb (kg) Open; Cab

Wheelbase, in. (mm)	115.2 in. 2925 mm
Front Tread Range, in. (mm)	60-88 in. 1524-2235 mm
Front Axle Clearance, in. (mm)	19.5 1300 axle, G43 420/85R34 tires in. 495 1300 axle, G43 420/85R34 tires mm
Turning Radius w/Brakes, ft (m)
Turning Radius w/o Brakes, ft (m)
Limited Slip Differential	limited slip or hydraulic lock differential available
Unballasted Operating Weight, lb (kg)
Approx. Ship Wgt, lb (kg) Open; Cab	23175 (10512) MFWD/CQT/1-452lbs inner weights/front weight support /Cat3 hitch with QC/shipping fuel, DEF/480/80R46 duals/420/90R30 fronts

Wheelbase, in. (mm)
Wheel Tread, Min. to Max. in. (mm)
Turning Radius w/o Brakes, ft (m)
Nebraska Test Unballasted w/Duals, lb (kg)
Unballasted Weight, lb (kg)

2WD
MFWD	Front 420/90R30Rear 480/80R46
4WD
Track widths

Country of Manufacture	Waterloo, IA USA
Ballasting Restrictions, lb (kg)	Refer to operator's manual
*Notes